Ford 2006 Escape J87R, Руководство по ремонту кузовов

Страница: 40 / 90

09-80B–14
BODY STRUCTURE [PANEL REPLACEMENT]
FRONT PILLAR REMOVAL[PANEL REPLACEMENT]
id098008744700
1. Rough cut area (A), drill the 30 RH and 31 LH weld locations indicated by (B), then remove the lower part of the
front pillar (outer).
Caution
•
Avoid cutting with a blowtorch or similar tools as the insulator (shaded area) is flammable.
2. When the front pillar is being removed, the side sill reinforcement may interfere and make removal difficult.
Therefore, rough cut and drill locations indicated by (C), then remove the side sill reinforcement.
3. Drill the 36 weld locations indicated by (D), and remove the front pillar.
Note
•
Drilling of the 31 locations indicated by (E) is not necessary when removing the front pillar and the front
pillar (inner) at the same time.
•
If the side sill reinforcement is not damaged, do not dispose of it, as it can be reinstalled. If it is damaged
considerably, replace it with a new one.
(D) 4
(B) 8
(B) 18
(D) 13
(D) 2
(E) 21
ROUGH CUT LOCATION FOR THE
FRONT PILLAR AND CUT-AND-JOIN
LOCATION FOR THE FRONT PILLAR
REINFORCEMENT
CUT-AND-JPIN LOCATION FOR
THE FRONT PILLAR (INNER)
CUT-AND-JPIN LOCATION FOR
THE FRONT PILLAR (OUTER)
(E) 10
(B) RH:4
(B) LH:5
(D) 13
B
A
A
C
C
B
B-B
A-A
C-C
(A) ROUGH CUT LOCATION FOR THE
FRONT PILLAR (OUTER)
CUT-AND-JOIN LOCATION FOR THE
FRONT PILLAR (OUTER)
(A) ROUGH CUT LOCATION FOR THE FRONT PILLAR
OUTER AND CUT-AND-JOIN LOCATION
FOR THE SIDE SILL REINFORCEMENT
{1.96in}
{1.96in}
50mm
80mm {3.14in} {3.54in}
90mm
70mm {2.75in}
50mm
BUE0980B016