collisions or rollover events, the Safety Canopy
娂
system will be activated
on both sides of the vehicle, regardless of which seats are occupied. The
Safety Canopy
娂
is designed to inflate between the side window area and
occupants to further enhance protection provided in side impact
collisions and rollover events.
The fact that the Safety Canopy
娂
did not activate in a collision does not
mean that something is wrong with the system. Rather, it means the
forces were not of the type sufficient to cause activation. The Safety
Canopy
娂
is designed to inflate in certain side impact collisions or
rollover events, not in rear impact, frontal or near-frontal collisions,
unless the collision causes sufficient lateral deceleration or rollover
likelihood.
Several Safety Canopy
娂
system components get hot
after inflation. Do not touch them
after inflation.
If the Safety Canopy
娂
system has deployed,
the
Safety Canopy
娂
will not
function again unless replaced.
The Safety Canopy
娂
system
(including the A, B and C
pillar trim) must be inspected
and serviced by a qualified
technician in accordance with
the vehicle service manual.
If
the Safety Canopy
娂
is not
replaced, the unrepaired area will
increase the risk of injury in a
collision.
Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to the
Air bag readiness
section in the
Instrument Cluster
chapter. Routine maintenance of the
air bag is not required.
2003 P207 Explorer Sport Trac
(p27)
Owners Guide (post-2002-fmt)
USA English
(fus)
Seating and Safety Restraints
93