Electronic compass
As an orientation aid, the compass
direction abbreviations are displayed
here.
If you suspect that the compass is
not operating correctly, it can be
recalibrated.
Note:
The compass reading may be
affected when driving near large
buildings, bridges, power lines and
broadcast antennas. Magnetic or metallic objects place on or in the
vehicle may also affect the compass reading.
•
Adjusting the compass
Note:
The ignition must be in the ON position.
1. Press and hold the
MODE
control until “VAR” appears in the
display. The current location
number should be displayed.
2. Press the
MODE
control
repeatedly until your desired
location number appears in the
display. Use this zone map to
determine which location number
you should be using.
•
Adjusting the calibration of the compass
Note:
To adjust the calibration find an open area free from steel
structures and high voltage lines.
LAMP
MODE
LAMP
9 VAR
1
2
3
4
5
6
7 8 9 1011
12
13
14
15
2003 P207 Explorer Sport Trac
(p27)
Owners Guide (post-2002-fmt)
USA English
(fus)
Driver Controls
53