Refer to
Air suspension system
in the
Driving
chapter of the
Owner’s
Guide
for more information.
4. Remove the lug wrench from the
jack. Rotate the lug wrench socket
out from the handle.
5. Locate pry off notch (if
equipped) and remove the center
ornament from the aluminum wheel
with the tapered end of the wheel
nut wrench that came with your
vehicle. Insert and twist the handle,
then pry against the wheel.
6. If equipped with a full
wheelcover, remove the wheelcover
center ornament then loosen the five black plastic nuts which retain the
wheelcover using the lug wrench.
7. Loosen each wheel lug nut one-half turn counterclockwise but do not
remove them until the wheel is raised off the ground.
Before placing the jack under the vehicle, NOTE the jack location
markings:
JACK LOCATION-FRONT
The jack location markings can be
found
on the lower outer edge of
the body.
•
Locate the jack locator mark (B -
circle
) on the body (C) near the
tire you are changing, then place
the jack (D)
under the frame
(A) of the vehicle
aligning it
with the mark (B -
circle
).
A
2003 Crown Victoria
(cro)
Owners Guide (post-2002-fmt)
USA English
(fus)
Roadside Emergencies
174
