1. Turn the ignition key to ON.
2. Press the power door unlock control on the door panel three times.
3. Turn the ignition key from ON to OFF.
4. Press the power door unlock control three times.
5. Turn the ignition back to ON.
6. The door locks will lock/unlock to confirm programming mode is
entered/active.
7. With the ignition still in the ON position, press the unlock control
once. After a five to ten second delay, the door will lock/unlock to
confirm successful programming.
8. After having waited the necessary time for the programming to
confirm, turn the ignition to OFF.
Once disabled, the autolock feature can be enabled by repeating the
procedure in steps 1–8.
KEYLESS ENTRY SYSTEM (IF EQUIPPED)
With the keyless entry keypad, you
can:
•
lock or unlock the vehicle doors
without using the key.
•
open the trunk.
•
disable/enable autolock.
See also
Remote entry system
in this chapter for more information.
Your vehicle has a factory-set 5–digit code that operates the keyless
entry system. You can also program your own 5–digit personal entry
code.
The factory-set code is located:
•
On the owner’s wallet card in the glove compartment,
•
Taped to the computer module, or
•
At your dealer.
When using the keyless entry keypad, press the middle of each button in
order to ensure a good activation.
1 2
3 4
5 6
7 8
9 0
2003 Crown Victoria
(cro)
Owners Guide (post-2002-fmt)
USA English
(fus)
Locks and Security
100
