To adjust the front seatback using
the manual recliner:
•
Lift and hold the handle located
on the side of the seat.
•
Lean against the seatback to
adjust it to your desired position.
You can recline the seat back or
bring it forward.
•
Release the handle when the desired position has been reached.
Using the power lumbar support (if equipped)
The power lumbar control is located
on the outboard side of the seat.
Press one side of the control to
adjust firmness.
Press the other side of the control
to adjust softness.
Heated seats (if equipped)
To operate the heated seats:
•
Push the indicated side of the
control for maximum heat.
•
Push again to deactivate.
•
Push the indicated side of the
control for minimum heat.
•
Push again to deactivate.
The heated seat module resets at every ignition run cycle. While the
ignition is in the run position, activating the high or low heated seat
switch enables heating mode. When activated, they will turn off
automatically when the ignition is turned to the OFF position.
2003 Crown Victoria
(cro)
Owners Guide (post-2002-fmt)
USA English
(fus)
Seating and Safety Restraints
108
