Installing hardware components |
14
Other hardware components
The table shows hardware component compatibility with appliance models.
Table 10: Hardware component compatibility
Appliance models
Hardware
component
S4016
1402-C3
S5032
S6032
S7032
1U Power supply
X
1402-C3 power
supply
X
2U Power supply
X
X
X
146 GB hard
drive
X
X
X
600 GB hard
drive
X
RAID battery
X
X
X
Install or replace the network module
You must install an interface module or a placeholder module in each slot before making the appliance
operational.
CAUTION:
Network modules are not hot-swap capable. Always turn off the appliance and
disconnect both power cable before installing or uninstalling network modules.
• If the appliance is deployed in a production environment, schedule a maintenance interval to perform the
installation procedure.
• Gather the following items:
• Number 2 Phillips screwdriver
• Anti-static wrist strap
Note:
A disposable anti-static wrist strap is included with the new network module.
• Verify hardware compatibility:
• Make sure that the network module is compatible with your appliance model.
• If you are installing a new fiber module, make sure that you have compatible fiber transceivers.
• If you are installing a replacement network module, identify which network module bay contains the failing
module.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components. Always take ESD
precautions when handling hardware components. We recommend that you perform all steps at
an ESD workstation. If an ESD workstation is not available, provide protection by wearing an anti-
static wrist strap attached to the chassis ground (any unpainted metal surface on the appliance).
1.
Turn off the appliance and disconnect the power cables.