Force1 Velocity Wave, Руководство пользователя

Страница: 14 / 20

VELOCITY RC BOAT
User Manual
13
PAIRING BOAT WITH TRANSMITTER
PICTURE 22
PICTURE 25
PICTURE 23 PICTURE 24
1. Put the RC boat into the water.
2. Turn on the transmitter. The transmitter LED indicator will flash and make a beep sound.
3. The transmitter will make three beep sounds and the LED indicator will be solid, meaning it has paired.
10. Load the motor seat module (Picture 22).
11. Screw in the motor seat (Picture 23).
12. Reconnect the cooling rubber hoses (Picture 24).
13. Reconnect the motor wire (Picture 25).
NOTE: Please route the battery wire to boat side to prevent the wire were cut off by the steering
wheel. All plugs must be tight. Be sure that the cabin cover is tightly closed to prevent leakage.