Force1 halo3000, Руководство пользователя

Страница: 16 / 20

FORCE1
14
Headless Mode allows you to fly your drone without knowing its
orientation, because it will be fixed in the direction you set it. Press
the Headless Mode button to enter Headless Mode before takeoff
(Fig. 11). Your transmitter will beep continuously and the drone lights
will begin to flash to indicate mode selection. You must now set the
Headless Mode drone direction.
FUNCTIONS
1-KEY START
1-KEY LAND
HEADLESS MODE
Place the drone on a flat surface. Press the 1-Key Start/Land Button
(Fig. 10) – the drone propellers will start spinning, and it is ready to
fly. Push the left stick up to fly the drone upwards.
Press the 1-Key Start/Land button while the drone is aloft to land it
(Fig. 10).
Setting Headless Mode Drone Direction
You must verify your drone’s flight direction before entering Headless Mode:
•
Be sure your drone is facing away from you (Fig. 12)
•
Press the Headless Mode button again to set the direction
•
Drone lights will stop flashing and then stay on, and the transmitter
will stop beeping to indicate the direction is verified
FIGURE 10
FIGURE 11
FRONT
REAR
RIGHT LEFT
FRONT
REAR
RIGHT LEFT
✔ ✖
FIGURE 12
NOTE:
Do not change the transmitter orientation after entering Headless Mode. Otherwise, you will lose
track of the set orientation (i.e., that you and your transmitter are facing “forward”).