CABLE LOOP DIAGRAM ( Lower Cable )
Step 19
1. Find out the end without plastic ball head of the Lower Cable (
149-3
) as shown in the diagram, thread
the end in sequence through the long notch of the Leg Developer (
23
) and Seat support frame (
21
),
and finally connect the end to the U-shape bracket of the Main Base Support (
4
) using 1 x
M10×28mm (
69
), 2 x ø10mm Washers (
84
) and 1 x M10 Aircraft Nut (
8
8).
2. Connect the Pulley (
123
) A, B and Lower Cable (
149-3
) to the Leg Developer (
23
) and Seat support
frame (
21
) using 1 x M10×70mm Allen Bolt (
70
), 2 x ø10mm Washers (
84
) and 1 x M10 Aircraft Nut
(
88
), and ensure the cable in the pulley groove.
3.
Connect the Pulley (
123
) C, D, E and Lower Cable (
149-3
) to the Front vertical frame (
8
), Cross
Double Floating Pulley Bracket (
59
) and Main Base Support (
4
) using 1 x M10×45mm Allen Bolt (
67
),
1 x ø10mm Washer (
84
) and 1 x M10 Aircraft Nut (
88
), and ensure the cable in the pulley groove.
4.
Connect the Pulley (
123
) F and Lower Cable (
149-3
) to the Double Floating Pulley Bracket (
58
) and L-
Shaped Cable Protector (
19
) using 1 x M10×50mm Allen Bolt (
68
), 2 x ø10mm Washers (
84
) and 1 x
M10 Aircraft Nut (
88
), and ensure the cable in the pulley groove.
25
Содержание JX-1600
Страница 6: ...90 Components Parts 1 4...
Страница 7: ...Components Parts 2 5...
