10
Carefully remove the haptic device and the foam stabilizer from the box, then remove the foam
stabilizer from the haptic device.
figure 3 – view of the shipping box after removal of the foam stabilizer and accessories
The accessories compartment contains the power supply, power and USB cables, as well as the
USB flash drive.
figure 4 – omega.x accessories
3.2
installing the power supply
Plug the power supply into the power connector. For safety purposes you should only operate your
omega.x haptic device using the original Force Dimension power supply that came with your hap-
tic device controller. Replacement power supplies can be ordered directly from Force Dimension.
end-effector
foam stabilizer
haptic device
power supply
USB flash drive
USB cable
power cable