Force Computers SPARC CPU-3CE, Руководство по установке

Страница: 28 / 49

Installation Guide SPARC/CPU-5CE
Page 20 FORCE COMPUTERS
1.6.5 Reset the System
If your system needs to be reset, you either press the reset button on the front panel or, if you
are in the Forth Monitor, type reset on the command line.
The system immediately begins executing the Power On SelfTest (POST) and initialization
procedures. Once the POST completes, the system either boots automatically or enters the
Forth Monitor, just as it would have done after a power on cycle.
1.6.6 OpenBoot Help
The Forth Monitor contains an on-line help. To get this, type:
A list of all available help categories is displayed. These categories may also contain
subcategories. To get help for special forth words or subcategories just type help [name]. An
example is shown on the next page.
ok
reset
ok
help
Enter ‘help command-name’ or ‘help category-name’ for more help
(Use ONLY the first word of a category description)
Examples: help select -or- help line
Main categories are:
File download and boot
Resume execution
Diag (diagnostic routines)
Power on reset
>-prompt
Floppy eject
Select I/O devices
Ethernet
System and boot configuration parameters
Line editor
Tools (memory,numbers,new commands,loops)
Assembly debugging (breakpoints,registers,disassembly,symbolic)
Sync (synchronize disk data)
Nvramrc (making new commands permanent)
ok