12
CAUTION:
Original packing is to prevent membrane damage during transit.
1) Remove the membrane housing cap.
2) Install the membrane by carefully pushing the spigot end into the socket at the far end
of the housing until completely in. BLACK ‘O’ ring end should be on cap side.
3) Replace housing cap.
MOUNTING THE PURIFICATION ASSEMBLY
1) Mark screw location at the desired positions with the use of provided label of
marker guides.
2) Screw wood/plastic screws supplied with the unit into marked positions. Leave screw
head out a little.
3) Adjust the plant cover on the screw with hole on cover, then mount the RO plant
assembly onto screws.
Installation of
RO Membrane
