The flushing of ultrafilter is very essential to enhance the life of the
membrane. A flush valve is provided at the bottom side of the product for
the same. You need to turn the knob towards the ‘flush’ mode and allow
the water to pass through for at least 2 to 3 minutes continuously. We
recommend you to do it on every alternate day or before starting the
product after a long gap of usage.
Taste Enhancer Cartridge Flushing
l
Disconnect the cartridge from the outlet and flush the water.
l
Connect again to the outlet.
l
Ensure that the inlet tube (white tube), outlet tube (white tube) and
flush tube (blue tube) are properly connected to the respective ports
of the product.
l
Ensure that there are no leakages from the joints.
l
Clean the product with a damp cloth.
l
Close the front cover to the chassis and fasten, as earlier.
l
Install the product as close to the refrigerator as you can. Ensure
the product is firmly held in position.
l
Connect the outlet port tube to the refrigerator inlet port with a
suitable connector.
l
Open the diverter valve.
l
Route the flexible water tube as required.
INSTALLATION COMPLETION STEPS
8
