FOR-A MV-410HS, Руководство по эксплуатации

Страница: 23 / 66

15 MV-410HS
MV-410HS can be remotely controlled using contact inputs to the TALLY IN/REMOTE
connector on the rear panel. The connector is also provided with pins for external tally inputs
that enables to display two color borders on video frames.
Connector pin assignments (25-pin, D-sub female) Inch screws
Pin no. Function Description
1 IN1 TALLY (Red) INPUT1 TALLY border (Red) display
2 IN2 TALLY (Red) INPUT2 TALLY border (Red) display
3 IN3 TALLY (Red) INPUT3 TALLY border (Red) display
4 IN4 TALLY (Red) INPUT4 TALLY border (Red) display
5 IN1 TALLY (Green) INPUT1 TALLY border (Green) display
6 IN2 TALLY (Green) INPUT2 TALLY border (Green) display
7 IN3 TALLY (Green) INPUT3 TALLY border (Green) display
8 IN4 TALLY (Green) INPUT4 TALLY border (Green) display
9 FULL 1 INPUT1 Full screen display
10 FULL 2 INPUT2 Full screen display
11 FULL 3 INPUT3 Full screen display
12 FULL 4 INPUT4 Full screen display
13 +5V +5V output (maximum 200mA DC)
14 GND GND
15 USER1 Preset layout 1
16 USER2 Preset layout 2
17 USER3 Preset layout 3
18 USER4 Preset layout 4
19 ADJ_IN Time adjustment input
20 ADJ_OUT Time adjustment output
21 FAN_ALARM Fan alarm output
22 NC Do not use.
23 NC Do not use.
24 NC Do not use.
25 NC Do not use.
Compatible connector: DB-25PF-N(JAE)
Cover: DB-C4-J11-S1(JAE)
Signal standard:
Make contact, TTL level negative logic pulse
The input signal pulse width should be 100ms or more. The input that is received while
the screen layout is being changed is not effective. If you change the screen layout,
wait for the change on the screen to be completed before inputting signals.
REMOTE/TALLY
USO
RESTRITO