16
2-3. SDI Input/Output Cards
2-3-1. MFR-9SDI12G
The MFR-9SDI12G is an SDI input card and can accept 9 total of 12G/3G/HD-SDI and ASI
signals.
Up to
8
cards can be installed into
Slot No. 01 to 08
.
► See Sec. 2-1-1. “Matrix Size Chart.”
1
2
3
4
5
6
7
8
9
BNC x 9 inputs (12G/3G/HD-SDI or ASI signal auto-detection)
Set up input signals in the Web-based Control Software as shown below.
Source Name
Open the [Web-based Control:
ROUTER SYSTEM SETTINGS - Source Name
page].
This page allows you to change source names displayed on Remote Controllers or other
devices.
Source Assignment
Open the [Web-based Control:
ROUTER SYSTEM SETTINGS - Source Assignment
page].
This page allows you to assign physical inputs to logical input channels.
2-3-2. MFR-9SDO12G
The MFR-9SDO12G is an SDI output card and can accept 9 total of 12G/3G/HD-SDI and ASI
signals.
Up to
8
cards can be installed into
Slot No. 09 to 16
.
► See Sec. 2-1-1. “Matrix Size Chart.”
1
2
3
4
5
6
7
8
9
BNC x 9 outputs (12G/3G/HD-SDI or ASI signal depending on crosspoint selection)
Set up output signals in the Web-based Control Software as shown below.
Destination Name
Open the [Web-based Control:
ROUTER SYSTEM SETTINGS - Destination Name
page].
This page allows you to change destination names displayed on Remote Controllers or other
devices.
Destination Assignment
Open the [Web-based Control:
ROUTER SYSTEM SETTINGS - Destination Assignment
page].
This page allows you to assign physical outputs to logical output channels.
