• ENGLISH •
71
Tightening the harness:
Pull the harness adjustment
strap so as to tighten it properly against the body of the
child. The harness is correctly tightened when the gap
between the harness and the child is no greater than
the thickness of your finger (1 cm).
NOTE: check that the buckle is secured by tugging the
shoulder and waist straps.
ATTENTION: Do not twist or overlap the harness
straps.
Dopo la regolazione, la cinghia di regolazione libera
deve essere nascosta sotto la fodera.
B10
B13
CLICK
B12
Reverse gear
4
Inclination angle
B14
B15
B11
CLIC
K
LOCK
UNLOCK
LOCK
UNLOCK
LOCK
Precautions to make sure you have correctly fastened the car seat harness
Click
Pull the harness adjuster strap towards you, neither
upwards nor downwards.
After adjustment, the loose adjuster strap should be hidden
under the cover.
• The harness belts are correctly adjusted according to the
child’s height, and are correctly tightened;
• The chest straps are adjusted in the correct position;
• The harness belts are not twisted;
• The tabs are properly engaged in the buckle
ATTENTION
IMPORTANT
For the safety of your child, always make sure that:
B10
B13
CLICK
B12
Reverse gear
4
Inclination angle
B14
B15
B11
CLIC
K
LOCK
UNLOCK
LOCK
UNLOCK
LOCK
Rotate the seat into the
facing position, a “click” will
indicate that it is locked.
Make sure that the button is
in the “locked” position.
IMPORTANT: Before starting the engine make sure
that the seat is locked in the facing position.
Do not place the car seat in the forward-facing
position if the child weighs less than 9 kg.
C13
INSTALLING THE CAR SEAT IN THE VEHICLE
Содержание FP360
Страница 287: ...287 NOTE ...