First Time Use
Controlling The Flame
The knobs have three basic positions: Off, MAX and MIN. You can achieve any fl ame
height between HI and LO by rotating the barbeque control knob between these
positions.
burner on Max
burner on Min
Off is
straight up
To turn to MAX,
push the knob
in and turn anti-
clockwise
Keep turning
to reach the
MIN position
Checking The Flames
Look underneath the barbeque so that you can see the fl ames. They
should be a soft blue colour with yellow tips. If the fl ames are too
yellow, there is too much gas and not enough air. The fl ame will
be ineffi cient and will give off too much smoke. If the fl ame is too
pale, there is too much air and not enough gas. If either of these
situations occur, you will need to adjust the burners.
Wait for the burners to cool down, then remove them. You will see
a screw on the right side of each burner. Screw it in to increase the
yellow tipping, and screw it out to reduce the yellowness of the
fl ame. You may need to loosen the lock nut that keeps the screw in
position. Be sure to retighten the nut when you have fi nished. If you
are unable to set the fl ame correctly, you should consult your retailer
before further use.
Special note: “Blowback” is a situation where the fl ame burns inside
the burner, towards the front. It can be recognised by a sharp
roaring sound coming from the burner. It is not dangerous unless it
is allowed to persist. If this occurs, simply turn the burner off, wait a
few seconds, then relight.
This adjustment should rarely
be necessary as the burners
are set at the factory.
correct fl ame
too much yellow tipping
