Min 13±2mm
25mm
Trim Ring
Arm
Wall
Filter Washer
Ball Joint
Slide chrome trim ring onto the appropriate
end of the arm. Ensure that a minimum of
13±2mm of 1/2” connection thread protrudes
past the finished wall. Simply screw the arm
onto the connection. Correct water proofing
must be applied.
Position the arm vertically and push trim
ring into place. Use wrenching flats to
tighten.
DO NOT USE ARM TO LEVER
Remove the protective cap from the
showerhead ball joint and screw the unit onto
the overhead arm ensuring the filter washer is
in place.
Shower Head Installations Instruction
Step 1:
Step 2:
Step 3:
Step 4:
FontanaShowers
©
FontanaShowers
©
FontanaShowers
FontanaShowers
Customer Service: 800-684-4489
fontanashowers.com
4
