Fonexion ideus ITDECT200, Руководство пользователя

Страница: 29 / 64

USER GUIDE
EN
29
ITDECT200
Call transfer
During a call, you can transfer the call to another handset.
During a phone call, press key once, you will be prompted to select the number of the
internal handset with which they wish to connect.
The destination handset will ring. With the melody defined for an internal call.
Press the
or key of the other handset to accept the call.
The two internal handsets will be connected. To complete the transfer of the call, the
initiating handset should be placed on the cradle and the external call will now be
connected to the second handset.
Party conference call
When a call comes, press (Handset1) or key
Then press (HS1) key once, you will be prompted to select the number of the
internal handset with which you wish to connect.
The destination handset will ring.
Press (Handset2) the
or key to accept call.
Press (HS1) the key then you can talk all together.
Press to quit the party conference, and other parties can also continue to
communication.
Locking the keypad
Press and hold the key for about 2 seconds. You will hear a beep tone, the unit will go back
to idle mode. Repeat the operation to unlock.
10 TROUBLESHOOTING
The ringtone is too low
Check if the ringing volume is properly set. If still doesn’t work restore to the factory settigns.
Receive only
Check if P/T mode is properly set.
Check if you have set the barring number, if you want dial out this number, reset the barring
number.
The base can not page the handset
Repeat the registration operations to register the base and handset again.
If the base has registered 5 handset, you can delete one handset and register the handset you
need.
Most of the functions failed
Check if the batteries are sufficiently charged, re-charge the batteries.
If batteries are ok, remove the battery, unplug the lines and reinstall after 10 minutes.