2. NETWORK CONFIGURATION SCREEN
This is a step-by-step screen to the following sections:
- Network configuration status.
- Edit network configuration.
The following actions can be performed using the buttons:
- Channel 1: Change to NETWORK STATUS SCREEN.
- Channel 2: Change to EDIT NETWORK SCREEN.
- Channel 3: Back to INITIAL SCREEN.
2.1. NETWORK STATUS DISPLAY
Display informs:
- Configuration type: Fixed IP or DHCP.
- IP: Current IP address.
- MS: Mask Subnet.
- PE: Gateway.
The following actions can be performed using the buttons:
- Any button returns to NETWORK SETTINGS SCREEN.
2.2. SCREEN TO EDIT NETWORK CONFIGURATION
Allows you to configure the device with DHCP or FIXED IP.
The following actions can be performed using the buttons:
- Channel 1: Selects DHCP mode.
- Channel 2: Selects fixed IP mode.
- VOL +: Applies according to the selection:
- If DHCP is selected, the new network configuration is applied and you return to DISPLAY.
NETWORK CONFIGURATION.
- If FIXED IP is selected, change to EDIT FIXED IP DISPLAY.
- VOL -: Cancels the action.
- 24 -
EN
ZSM-1000_MANUAL_(EN)_20190426.qxp_Maquetación 1 27/6/19 15:33 Página 24
