Fona XPan 3D Plus, Руководство по эксплуатации

Страница: 37 / 44

FONA XPan 3D Plus
37
11. MESSAGES
11.1. WARNING MESSAGES
Message Action required
X-ray generator hot The tube load for the selected exposure does not fit.
Wait for tube cool down.
CAM init Wait for completion of initialization procedure.
Adjust Arm Position The rotating arm is out of position.
Turn the system OFF and manually relocate the arm centrally, then turn the system ON.
Wait PC READY Computer not connected or the application program is not in acquisition mode. Start the
acquisition program on computer.
11.2. ERROR MESSAGES
ALARM RED LIGHT BLINKING
The ERROR number is shown on the display with the red light blinking.
To reset the error condition, press the BACK key.
Error# Message Action required
1 kV reference signal out of range Switch the unit off. Report to technical service.
2 mA reference signal out of range Switch the unit off. Report to technical service.
3 Carriage rotation encoder failure Switch the unit off. Report to technical service.
4 Carriage displacement encoder failure Switch the unit off. Report to technical service.
5 Carriage rotation sensor failure Switch the unit off. Report to technical service.
6 Carriage displacement sensor failure Switch the unit off. Report to technical service.
7 Collimator displacement sensor failure Switch the unit off. Report to technical service.
8 Motor 3D/Pan sensor failure Switch the unit off. Report to technical service.
10 Tube-head temperature exceeding limit Wait for tube cool down.
11 Exposure aborted during irradiation Restart if termination was requested by the operator.
Call for technical service if termination was spontaneous.
12 Exposure aborted before irradiation Restart if termination was requested by the operator.
Call for technical service if termination was spontaneous.
13 38 V DC supply out of range Switch the unit off. Report to technical service.
14 24 V DC supply out of range Switch the unit off. Report to technical service.
15 15 V DC supply out of range Switch the unit off. Report to technical service.
16 5 V DC supply out of range Switch the unit off. Report to technical service.
17 High voltage failure Switch the unit off. Report to technical service.
19 Exposure time exceeded Switch the unit off. Report to technical service.
20 Exposure aborted after irradiation Call for technical service if termination was spontaneous.
21 No tube current Switch the unit off. Report to technical service.
23 Filament current out of range Switch the unit off. Report to technical service.
25 Thermal Sensor Failure Switch the unit off. Report to technical service.
26 Battery fault (low voltage) Switch the unit off. Report to technical service.
28 Collimator encoder failure Switch the unit off. Report to technical service.
30 PC - Unit communication failure during exam Switch the unit off. Report to technical service.
32 Control unit fault Switch the unit off. Report to technical service.