Fona MyCrown Design, Руководство по обслуживанию

Страница: 6 / 80

6
MyCrown Design
1.2.1.3 Movement and stability of the unit
1.2.1.4 Maintenance and repair
As distributors of dental instruments and laboratory equipment, we can
assume responsibility for the safety properties of the unit only if the
following points are observed:
● The maintenance and repair of this unit may be performed only by
FONA Dental or by agencies authorized by FONA Dental.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
1.2.1.5 Accessories
In order to ensure product safety, this device may be operated only with
original FONA Dental accessories or third-party accessories expressly
approved by FONA Dental. In particular, only the power cable supplied
with the unit or the corresponding original spare part may be used with
the unit. The user is responsible for any damage resulting from the use of
non-approved accessories.
NOTICE
The unit can overturn or slip away
For reasons of tilt stability, the unit must be pulled by its side handles
when being moved. If you push the unit, obstacles on the floor could
block its wheels, thus causing it to overturn.
The wheels of the unit have brakes which can be locked to ensure
secure positioning. If the unit is steeply inclined or standing on a slippery
surface and lateral forces are acting on it, it may slide even though the
wheel brakes are locked.
➢ Always make sure that the unit's footprint is a flat, nonskid surface.