Follett Horizon Elite Chewblet HCD1010NMS, Руководство по установке

Страница: 10 / 16

10
remote condensing
ICE MANAGER
Connect docking assembly to ice machine.
6
Internal connections
➊
Refrigeration lines
6.3
➊
➋
• Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting ➊
• Insert ice transport tube all the way into
coupling and tighten nut firmly ➋
Ice transport tube installation
6.1
• Remove twist tie
• Carefully pass cord through opening and
plug into wall outlet
Power cord
6.4
• Evacuate line set.
• Connect self-sealing liquid and suction
line fittings ➊
If water solenoid is already mounted to
evaporator:
• Insert potable water line into shut-off valve.
If this is an undercounter installation:
• Mount water solenoid atop evaporator and
locate the shut-off valve inside the machine.
Insert potable water line into shut-off valve.
If water solenoid is not mounted and
machine will not be installed under-
counter:
• Mount water solenoid to inside rear (upper
right corner) of docking assembly using one
screw.
• Insert potable water line into shut-off valve -
locate the shut-off valve outside the machine.
•
Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
Water solenoid, shut-off valve,
and potable water line options 6.2