Follett HCD710ABS, Руководство по эксплуатации и обслуживанию

Страница: 31 / 40

HCD710A, HMD710A 31
Reference # Description Part #
1 Tube, ice transport, insulated 01118181
2 Shuttle assembly 01118132
3 Switch, shuttle 01006261
4 Compression nozzle 01222744
5 O-ring, shuttle 01111848
6 Screw, reservoir (3 required) 206395
7 Auger hardware (includes screws, key, retainer) 01222744
8 Key 01164938
9 Bolt, gearmotor mounting (2) (self-contained units), includes washers 01118629
10 Cartridge assembly, shuttle spring 01118033
11 Gearmotor, (includes capacitor) 01222751
12 Main housing, self-contained 01222736
13 O ring 01248368
14 Seal, auger shaft 00969592
15 Cup, cleaner 01164995
16 Cap, cleaner 01118637
Not shown Tubing, water, 3/8" OD 502719
Not shown Tubing, water, 1/4" OD 502079
17 Retainer kit, evaporator 01223023
18 Solenoid, water feed 01223015
19 Reservoir lid and sensors (includes screws and o-ring) 01118108
20 Valve, shut-off, water 502921
21 Auger, 710 self-contained (includes seal, key, and auger hardware) 01222686
22 Evaporator, 710 01222694
23 Rear bushing housing and bushing (includes (1) o-ring) 01222710
24 Reservoir assembly, water (includes lid) 01222728
25 Tube, vent (17" required) 502079
26 Tube, cleaner 01118660
27 Kit, MicroChewblet 01161843
28 Tube, shuttle drain, insulated 01118678
29 Insulation, gearbox 01165240
30 Solenoid, purge 01222702
31 Insulation kit, 710 evaporator/reservoir 01222769
32 Check valve 01122381
33 Tube, drain, reservoir, insulated 01118124
34 Tube, drain, 710 01099662
35 O-ring, reservoir lid 01085588
Not shown Kit, scale (includes reservoir, purge solenoid, drain tubes and fitting) 012224815
36 O-ring, MicroChewblet 01161850
Not shown Drain kit (includes 2 ft. x 1" OD silicone tubing, 3/4" x 1" slip, 3/4" barb 3/4" FPT
(2), 3/4" barb x 3/4" FPT elbow) 01210350