background image

4

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and 
outstanding after-the-sale support. To ensure that this equipment delivers the same degree of service, we ask 
that you review the installation manual (provided as a separate document) before beginning to install the unit. 
Our instructions are designed to help you achieve a trouble-free installation. Should you have any questions or 
require technical help at any time, please call our technical service group at (800) 523-9361 or (610) 252-7301.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage 
is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of a claim, 
if necessary.

Check your paperwork to determine which model you have. Follett model numbers are designed to provide information 
about the type and capacity of Follett equipment. Following is an explanation of the different model numbers in the 
1000 series.

Horizon Series Icemaker Model Number Configurations

A Air-cooled, 

self-contained

W Water-cooled, 

self-contained

Air-cooled, remote condensing unit

Air-cooled, no condensing unit for

 

connection to parallel rack system

A

V

S

C

1000

HC

HC Horizon
 Chewblet

®

D  Low side 115/60/1
 Condenser 

208-230/60/1

 

(remote condensing only)

C 208-230/60/1

 (self-contained 

only)

E 230/50/1

 (self-contained 

only)

Icemaker

Model Series

Voltage

Capacity

Model Series

Condenser

V Vision™
H Harmony™
B Ice 

storage

 bin
J Drop-in

1000 up to
 1036 

lbs 

 (471kg)
1400 up to
 1450 

lbs 

 (658kg)

S Satellite-fill™
T Top-mount 

Application

Configuration

Chewblet is a registered trademark of  Follett Corporation, registered in the US.

 

CAUTION

•  Warranty does not cover exterior or outside installations.

•  Moving parts. Do not operate with front cover removed.

•  Hot parts. Do not operate with cover removed.

•  To reduce risk of shock, disconnect power before servicing.

•  Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution 

label on product and follow instructions carefully.

•  Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.

•  Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

Содержание HCC1000A









































Отзывы: