Follett H D710AVS, Руководство по установке

Страница: 15 / 20

15
VISION • RIDE Technology
self-contained
• Position plate into opening and secure
with supplied screw
Power cord
7.11
• Remove twist tie
• Carefully pass cord through opening and
plug into wall outlet
• For H_E units, install a suitable plug
Power cord
7.10
➊
➋
• Connect cooling water lines to ice
machine ➊
• Water valve is set at the factory.
DO NOT
remove seal or adjust water valve
➋
Cooling lines and power
7.9
CLEANER FULL DRAIN CLOG HIGH PRES HIGH AMPS SERVICE MAINT/CLEAN LOW WATER TIME DELAY SLEEP CYCLE MAKING ICE LOW BIN POWER ON
CLEAN
TDS
HIGH
LOW
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW:
for low-scale water
TDS switch
7.12