background image

4

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and 
outstanding after-the-sale support. To ensure that this equipment delivers the same degree of service, we ask 
that you review the installation manual (provided as a separate document) before beginning to install the unit. 
Our instructions are designed to help you achieve a trouble-free installation. Should you have any questions or 
require technical help at any time, please call our technical service group at (877) 612-5086 or +1 (610) 252-
7301.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage 
is found, notify the shipper immediately and contact Follett Corporation so that we can help in the fi ling of a claim, 
if necessary.

Check your paperwork to determine which model you have. Follett model numbers are designed to provide information 
about the type and capacity of Follett equipment. Following is an explanation of the different model numbers in the 
1000 series.

A

V

S

C

700

HC

Configuration

Application

S RIDE

®

 (RIDE remote ice 
delivery equipment)

T Top-mount 

 400  up to
 454 

lbs

 (206kg)
700 up 

to

 750 

lbs 

 (340kg)
1000 up to
 1036 

lbs 

 (471kg)
1400 up to
 1450 

lbs 

 (658kg)
1650 up to
 1580 

lbs 

 (717kg)

V Vision™
H Harmony™
B Ice 

storage

bin

J Drop-in
M Ice 

Manager™

 diverter 

valve

 system

Condenser

Series

Voltage

Machine

C  208-230/60/1 (icemaking head)

 Self-contained 

only.

D  115/60/1 (icemaking head)
 

Self-contained and remote.

 

If remote unit, high side is

 

208-230/60/1.

E 230/50/1 

(icemaking 

head)

 Self-contained 

only.

F  115/60/1 (icemaking head)
 

Remote only. High side is

 

208-230/60/3.

MC Maestro™
 Chewblet
 (400 

Series)

HC Horizon
 Chewblet
 (1000, 

1400,

 1650 

Series)

HM Horizon
 Micro
 Chewblet

A Air-cooled, 

self-contained

W Water-cooled, 

self-contained

R Air-cooled, 

remote 

condensing unit

N  Air-cooled, no condensing 

unit for

 

connection to parallel rack 
system

Chewblet

®

 Ice Machine Model Number Configurations

 

CAUTION

•  Warranty does not cover exterior or outside installations

•  Moving parts. Do not operate with front cover removed.

•  Hot parts. Do not operate with cover removed.

•  To reduce risk of shock, disconnect power before servicing

•  Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution 

label on product and follow instructions carefully.

•  Ice is slippery. Maintain counters and fl oors around dispenser in a clean and ice-free condition.

•  Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

Содержание C20000









































Отзывы: