24
FOLEYCO.COM
Checking the Fuses
The electrical system is protected by fuses. It requires no maintenance; however, if a fuse blows, check the
component/circuit for a malfunction or short.
1. To replace fuses, pull out on the fuse to remove it.
2. Install a new fuse.
Drive System Maintenance
Checking the Tire Pressure
Service Interval: Every 50 hours/Monthly (whichever comes first)
Park the machine on a level surface, shut off the engine, verify the brake is engaged, and remove the key.
Check to ensure that the air pressure as at the level rated on the tire. Check the tires when they are cold to get
the most accurate pressure reading.
Belt Maintenance
Adjusting the Belts
Service Interval: After the first 8 hours
1. Park the machine on a level surface, shut off the engine, verify the brake is engaged, and remove the key.
2. Remove screws that hold on the belt cover, and remove the belt cover.
3. Loosen the bolts that hold on the tensioner if the belt tension needs to be adjusted.
Note:
Do not over tension the belt as it will damage it.
4. After inspecting and adjusting the tension secure the belt idler bolts.
5. Install the belt cover with the screws previously removed.
Inspecting the Belts
Service Interval: Yearly
The drive belts on the machine is durable. However, the normal exposure to UV radiation, ozone, or
incidental exposure to chemicals can deteriorate the rubber over time and lead to premature wear or
material loss (i.e., chunking).
Inspect the belts yearly for signs of wear, excessive cushion cracks, or large embedded debris. Replace them
when needed. Components may result.
