Foerster 6.461.21, Руководство по эксплуатации

Страница: 46 / 57

SENSOR SYSTEM Ro 35 L
4.5 Switching on motor OPERATION
4-14
6.461.21 - 2008/06
4.5 Switching on motor
NOTE !
Check the diameter and height settings of the sensor system before
switching on.
The operating elements used to switch on the rotating head drive are lo-
cated on the motor control.
The motor control is installed in a separate housing.
Acceleration times: approx. 4 sec (4,500) rpm
approx. 10 sec (9,000) rpm
Deceleration times without braking: approx. 210 sec (4,500) rpm
approx. 360 sec (9,000) rpm
The braking time until standstill can be reduced to a few seconds by actu-
ating the hand brake.
The rotating head must run quietly and without loud noises when no test
material is present.
Whistling noises when starting or braking indicate that the belt needs to
be retensioned.
NOTE !
Switch off the drive immediately if grinding noises are heard.
Possible causes:
Incorrect test head replacement parts inserted
Incorrect nozzles inserted
Nozzle or holders not securely fitted
Nozzle not fitted in end position