Focustronic Alkatronic, Руководство пользователя

Страница: 8 / 39

8
within 10 seconds the app will connect and you will see a green dot in the app
window.
1. Go to APP-store and download the app. Do not open the app yet.
2. Make sure you have Bluetooth enabled on your Phone/tablet.
3. Power upp the Alkatronic with the AC-adapter. Never use any other adapter
than the one provided!
4. Open the Alkatronic app. Select ”Add
New Device”. Follow the on-screen
instructions, type in the serial number and
user account details. Connection
between the App and Alkatronic is confirmed by
a green dot at the Alkatronic logotype.
5. In the app on the Main-screen, click on settings,
scroll down to wi-fi, and type the SSID and
password of your home-router. This Wifi
connection is not needed for the direct
communication between the app and Alkatronic
when you are near the machine, but it is needed
in order to reach the machine outside of your
home through the cloud, get alerts and also to
establish time-sync. After entering the data, press
save.
Socket setup and connection
Physical set-up
For Calciumreactor-user with pH-probe controlled CO
2
-dosing
1) Plug the Alkatronic-socket into a power plug from wall.
2) Put the cord from the pump that feeds the calcium reactor with aquarium water
into the Alkatronic socket. See Figure 4.
Now, as long as the Alkatronic socket is ”open”, which is indicated by a red light
on the socket, the Alkatronic socket gives power to your pump that feeds your
Ca-reactor (which usually is a peristaltic pump for continuously use). Only when
a measured dKH is above your settled high reference value (and
action mode is