Focusrite Scarlett 18i6 Скачать руководство пользователя страница 23

Страница: 23 / 24

Front and rear connectivity

Analogue channel inputs (inputs 1-8)

•

Two Mic XLR combo (channels 1-2) on front panel

•

Two Line ¼” TRS (channels 3-8) on rear panel

•

Automatic switching between mic / line (channels 1-2)

•

Switching between line / instrument inputs (channels 1-2) via Scarlett Mix Control application

Digital channel inputs (inputs 9-18) 44.1 - 96kHz

•

Stereo S/PDIF input on RCA

•

Eight optical ADAT channels (4 channels at 88.2 / 96kHz)

Analogue audio outputs (outputs 1-4)

•

Two ¼” TRS jacks

•

Output level control (analogue)

•

Separate stereo headphones mix (outputs 3-4) on ¼” TRS with independent analogue volume control

Digital channel outputs (outputs 5-6) 44.1 - 96kHz

•

Stereo S/PDIF output on RCA

Other I/O

•

One USB Type “B” connector

•

Two standard 5-pin DIN MIDI connectors: in and out

•

DC power input connector (for use with supplied universal input power supply)

Front Panel Indicators

•

Eight 2-segment input meters, -18 and 0dBFS

•

“Power” indicator

•

“LKD” lock indicator

•

“USB” connected indicator

•

Instrument input source selection LED for channels 1 and 2

•

Phantom power (48V) switch and LED for inputs 1 and 2

Weight and dimensions

•

Dimensions: approx. 215 x 45 x 220mm (W x H x D)

•

Weight: 1.5kg

Troubleshooting

For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting

examples. www.focusrite.com/answerbase.

Copyright

Focusrite is a registered trade mark of Focusrite Audio Engineering Limited. Scarlett is a trade mark of Focusrite Audio Engineering

Содержание Scarlett 18i6

























Результаты поиска

Содержание Scarlett 18i6

Отзывы:

Похожие инструкции для Scarlett 18i6

Бренды по названию

Популярные бренды

Focusrite Scarlett 18i6, Руководство пользователя

Результаты поиска

Содержание Scarlett 18i6

Отзывы:

Похожие инструкции для Scarlett 18i6

Бренды по названию

Популярные бренды