6
Front Panels
. . . Continued
6. MADI Input Indicators
If a selected input signal is either invalid or not present the input source LED will flash.
•
COAXIAL
– Orange LED, indicates that Coax is the selected input, or that AUTO is selected
and the BNC input is valid.
•
OPTICAL
– Orange LED, indicates that Optical is the selected input, or that AUTO is
selected and the Optical input is valid.
•
AUTO
– Indicates that input selection is automatically set (Optical preferred). This LED
will flash if Auto is selected but neither input (COAX or Optical) is valid.
7. Clock Source [MADI Clock]
•
SRC
– Orange LED, indicates that SRC is currently active.
•
REDNET
– Orange LED, indicates that MADI signal is using the network clock.
•
MADI INPUT
– Orange LED, indicates that MADI output clock is locked to the input rate.
•
WORD CLOCK
– Orange LED, indicates that MADI input/output is locked to the incoming
word clock signal on rear panel BNC.
8. MADI Status [Signal]
•
SRC
– Orange LED, indicates that SRC is currently active.
•
INPUT
– Green LED, indicates a signal present at the selected MADI input. The LED will
light if any of the channels in the input stream has a value of -42dB(fs) or higher.
•
OUTPUT
– Green LED, indicates a signal present at the selected MADI output. Illuminates
as for Input signal.
•
O/P VARISPEED [VARISPEED]
– Orange LED, indicates that the unit is running in
56-channel MADI mode. This LED will flash when either:
a) the signal is out of MADI tolerance (beyond 1% of nominal) and the unit is NOT in
56-channel mode, or...
b) if ‘MADI follow Rx’ is set and an invalid input is detected.
6
7
8
6
7
8
ON
D64R
D64R
D64R
RedNet 6
RedNet 6
RedNet D64R
Содержание RedNet D64R
Страница 1: ...User Guide www focusrite com FA9096 06 ON ...
