14
ID (Identification)
Clicking on the ID icon
will identify the physical device being controlled by flashing its front panel
LEDs.
Tools Menu
Clicking on the Tools icon
will gain access to the following system settings:
Sample Rate Conversion – Each option an On/Off toggle. Can be switched separately.
• Channels 1–2
• Channels 3–4
• Channels 5–6
• Channels 7–8
• Channels 9–10
• Channels 11–12
• Channels 13–14
• Channels 15–16
RedNet Clock Source – Only one of the following can be selected at any time.
• Internal (RedNet is network master but running from internal clock)
• BNC Input (Word Clock)
• XLR Input (DARS or Audio)
• DB-25 (Input pair 1)
• DB-25 (Input pair 5)
Note: When selecting any clock source, RedNet D16/D16R will become a preferred master.
Preferred Master – On/Off state.
Input 1–2 from XLR – Tick option On/Off. Replaces channels 1–2 on the DB25 connector.
Input 3–4 from RCA – Tick option On/Off. Replaces channels 3–4 on the DB25 connector.
RCA Output Source – Only one can be selected at any time.
• Channels 1–2
• Channels 3–4
• Channels 5–6
• Channels 7–8
• Channels 9–10
• Channels 11–12
• Channels 13–14
• Channels 15–16
Word Clock Output – One can be selected at any time.
• Network
• Network (Base Rate)
Word Clock Input Termination – Tick option On/Off. (Terminates word clock input BNC with 75Ω.)
