![Focusrite REDNET D16 AES Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/focusrite/rednet-d16-aes/rednet-d16-aes_user-manual_2314565011.webp)
11
Physical Characteristics
RedNet D16/D16R dimensions are illustrated in the diagram above.
RedNet D16/D16R requires 1U of vertical rack space and at least 350 mm of rack depth, to allow for
cables. RedNet D16/D16R weighs 3.74 [3.84] kg and for installations in a fixed environment (eg., a
studio), the front-panel mounting screws will provide adequate support. If the units are to be used
in a mobile situation (eg., flight-cased for touring, etc.), consideration should be given to using side
support rails within the rack.
RedNet D16/D16R generates little significant heat and is cooled by natural convection.
Ventilation is via slots in the enclosure at both sides. Do not mount RedNet D16/D16R immediately
above any other equipment which generates significant heat, for example, a power amplifier. Also,
ensure that when mounted in a rack, the side vents are not obstructed.
Power Requirements
RedNet D16/D16R is mains-powered. It incorporates a ‘Universal’ power supply, which can operate
on any AC mains voltage from 100 V to 240 V. The AC connection is made via a standard 3-pin IEC
connector[s] on the rear panel.
One or two mating IEC cables are supplied with the unit – these should be terminated with mains
plugs of the correct type for your country.
The AC power consumption of the RedNet D16/D16R is 30VA.
Please note that there are no fuses in RedNet D16/D16R, or other user-replaceable components of
any type. Please refer all servicing issues to the Customer Support Team (see “Customer Support
and Unit Servicing” on page 18).
465.0mm / 18.3”
31.8mm / 1.25”
263mm / 10.35”
D16R
When PSU A & PSU B are both connected, PSU A becomes the default supply and therefore draws
more current than B. If a backup mains supply is provided from an uninterruptable source, it is
recommended that this is connected to input B.