background image

6

EQ

Equalisation of sound is an essential part of the recording process, necessary to remove or boost various sections of the audible 
frequency spectrum. The Focusrite EQ is 4-band, with 2 fully parametric mid bands and the option of shelving or high-/low-pass  
on bands 1 and 4, and exhibits the same curves as the classic Focusrite EQ; all that’s required to sculpt sound with truly  
professional flair! 

The two central bands have the same 3 knobs for modifying parameters: Frequency, Gain and Q. When band 1 or band 4 are in 
high- or low- pass mode (switch in lower position), the Gain knob changes into Q. This is because there is no cut or boost option with 
a high- or low- pass filter, just a slope of variable Q at a selected cut-off frequency. The shelving mode doesn’t require a Q control 
because the slope is fixed.

The controls are:

INPUT Knob – Increases or decreases the level of the signal at the EQ input. No gain modification occurs with the knob 
in a central position. Rotate clockwise to increase and anticlockwise to decrease the level by up to 18dB

FREQUENCY Knobs – Set the frequency that the band affects, e.g. the centre frequency in bell mode, the cut-off frequency in high-/
low- pass mode or the start of the shelf in shelving mode

GAIN Knobs – Increase or decrease the level of the corresponding band of EQ. The band will have no effect with the knob 
in a central position. Rotate clockwise to increase and anticlockwise to decrease the level by up to 18dB

Q Knobs – Set the level of resonance of the band, making the band have a more pronounced effect. Increasing Q decreases the band 
width so that the bell acts on less of the frequency range 

SHELVING/HIGH- or LOW-PASS Switch – Selects a low-shelf (upper) or high-pass (lower) for band 1, and a high-shelf (upper) or 
low-pass (lower) for band 4

OUTPUT Knob – Increases or decreases the level of the signal at the EQ output. No gain modification occurs with the 
knob in a central position. Rotate clockwise to increase and anticlockwise to decrease the level by up to 18dB

Содержание Plug-in Suite










Отзывы: