Focus ER1280TN, Инструкция по эксплуатации

Страница: 36 / 39

30
Others
Note A point to notice
Info.
Supplementary information
Control Input/Output Signals and Circuit
16 ms
+12 V
0 V
8 ms
+12 V
0 V
CLK OUT signal
• When F is selected in CLOCK OUT of REAR TERMINAL
menu (at 6H or 8H mode) or while recording in L18H-1280H
mode.
• When REC-1 to REC-60 is selected in CLOCK OUT of REAR
TERMINAL menu (at 6H or 8H mode).
CLK OUT terminals (screw)
DC 12 V
10 k
Ω
GND
CLK OUT
10 k
Ω
<Interface circuit inside the VCR>
ALM/MODE/CALL OUT terminals (screw)
Active “L” level voltage (0 – + 0.4V) output; max.
drive current 50 mA (+5V dc)/10 mA (+24V dc)
Non active Open; max. v24V dc
GND
ALM/MODE/CALL OUT
<Interface circuit inside the VCR>
ALM/RST/REC IN terminals (screw)
Active When input terminals are short-circuited to
GND or “L” level voltage (0 – + 1.6V) applied.
Time for active 0.1 sec. or over.
Non active Open the input.
DC 5 V
10 k
Ω
22 k
Ω
22 k
Ω
0.047
µ
F
GND
ALM/RST/REC IN
<Interface circuit inside the VCR>