Focus ER1280TN, Инструкция по эксплуатации

Страница: 17 / 39

11
Advanced Functions
Reference page
Recording Techniques
<PROGRAM TO RECORD>
DW START END HR
1 --- --:-- --:-- ------
2 --- --:-- --:-- ------
3 --- --:-- --:-- ------
4 --- --:-- --:-- ------
5 --- --:-- --:-- ------
6 --- --:-- --:-- ------
7 --- --:-- --:-- ------
8 --- --:-- --:-- ------
1 6 5 4 3 2
1) Program number
Up to eight programs can be set.
2) Day of the week display
• Display HLD to apply HOLIDAY SET UP setting. Display SPL to apply
SPECIAL DW setting. (
next page)
• Display DAY to record at the programmed time everyday.
3) Recording start-time
4) Next day indicator (•)
Recording continues to the following day.
5) Recording end-time
6) Recording mode
• Recording mode varies by the TAPE LENGTH setting of FIRST TIME SET
UP menu. See the table shown to the left.
• Timer recording will not be performed when set to SKIP.
Accurately preset the day and present time before timer programming. ( page 6)
Info.
• Time is displayed in 24-hour format.
Info.
When the Timer Recording indicator ( )
starts flashing:
a) A tape is not inserted.
b) A tape without erasure prevention tab
is inserted.
– Remedy -
1. Press the TIMER REC button to turn
off the Timer Recording indicator( ).
2. In case of this:
a) Insert a tape.
b) Insert a tape with erasure
prevention tab intact.
3. Press the TIMER REC button twice to
turn on the Timer Recording indicator.
Info.
• To erase a program:
Select the program number you wish
to erase, turn the SHUTTLE ring to
the right (DW column flashes), and
then turn the SHUTTLE ring to the
left.
Note
• If the VCR’s clock has not been set,
the VCR will not be in timer recording
stand-by mode even though the
TIMER REC button is pressed.
Timer Recording
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<TIMER PROGRAM>
PROGRAM TO RECORD
HOLIDAY SET UP
SPECIAL DW MON-SAT
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 --- --:-- --:-- ------
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 --- --:-- --:-- ------
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 TUE --:-- --:-- ------
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 TUE 12:00 --:-- ------
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 TUE 12:00 15:00 ------
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 TUE 12:00 15:00 L24EP
3 --- --:-- --:-- ------
<PROGRAM TO RECORD>
DW START END HR
1 DAY 08:00 20:00 L40EP
2 TUE 12:00 15:00 L24EP
3 --- --:-- --:-- ------
T-120
T-160
8EP L24EP L40EP 64EP 96EP
128EP 160EP 224EP 320EP
480EP 640EP 960EP 1280EP SKIP
6EP L18EP L30EP 48EP 72EP
96EP 120EP 168EP 240EP
360EP 480EP 720EP 960EP SKIP
Example: Setting number 2 to L24H mode timer recording from
12:00 to 15:00 every Tuesday.
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn the JOG dial to select TIMER PROGRAM and turn the
SHUTTLE ring to the right.
• <TIMER PROGRAM> menu appears.
3. When the cursor ( ) is next to PROGRAM TO RECORD,
turn the SHUTTLE ring to the right.
• <PROGRAM TO RECORD> menu appears.
4. Turn the JOG dial to select the program number and turn the
SHUTTLE ring to the right to select.
5. In the DW column, turn the JOG dial to select the Day of the
Week. Turn the SHUTTLE ring to the right to select.
6. In the START column, turn the JOG dial to select the
hour
digits of the start time. Turn the SHUTTLE ring to the right
when done.
Set the
10-minute
digit and
1-minute
digit in a similar
fashion.
7. In the END column, turn the JOG dial to select the
hour
digits of the end time. Turn the SHUTTLE ring to the right
when done.
Set the
10-minute
digit and
1-minute
digit in a similar
fashion.
8. In the HR column, turn the JOG dial to select the
RECORDING mode.
9. Turn SHUTTLE to the right when done. (Cursor flashing will
stop.)
• If the program has not been set completely, the DW
column will continue to flash.
Repeat steps 4 to 9 to set two or more programs at once.
10. Press MENU button.
• The day and present time display appears on screen.
11. Press TIMER REC button twice.
• The VCR is turned off and the Timer Recording indicator ( ) illuminates on the
fluorescent display.
When TIMER REC button is pressed during the programmed period, the VCR
starts recording immediately.