Focus Agora 850, Руководство по эксплуатации

Страница: 17 / 20

Page 17 of 20
5 – MAINTENANCE:
a) Taking out the ashes:
CAUTION: BE SURE THE FIRE IS OUT AND THE FIREPLACE BODY
COLD BEFORE REMOVING ASHES!
The ash removal hatch located below the grate is designed to make cleaning
easier. Dispose of ashes in an appropriate ash container (not supplied). The
hatch is removed by turning the handle. After cleaning, be sure to secure the
hatch back properly!
CAUTION: DO NOT LIGHT A FIRE WITH ASH REMOVAL HATCH
REMOVED, AS THIS WILL PRODUCE OVER-FIRING OR HOUSE FIRE.
DAMAGE CAUSED FROM NON-OBSERVANCE OF THIS CAUTION IS
NOT COVERED UNDER FOCUS LIMITED WARRANTY.
b) Creosote formation and need for removal:
When wood is burned slowly, it produces tar and other organic vapors, which
combine with expelled moisture to form creosote. The creosote vapors
condense in the relatively cool chimney flue of a slow-burning fire. As a
result, creosote residue accumulates on the flue lining. When ignited, this
creosote makes an extremely hot fire. The chimney and chimney connector
should be inspected at least once every two months during the heating
season to determine if a creosote buildup has occurred. If a significant layer
of creosote has accumulated (3mm or more) it should be removed to reduce
the risk of a chimney fire.