FITTING THE DECORATIVE FRAME ASSEMBLY
P23 Monet Trio models :
The appliance is supplied with a selection of
differently couloured decorative frames.
Remove the chosen decorative frame assem-
bly from any protective packaging, and
remove any protective film that may be pres-
ent on the frame.
The frame is hung onto the firebox via the
two upper hanging brackets and then
secured to the firebox via the two lower
knurled fixing bolts, which are inserted
through the holes in the lower frame mount-
ing brackets after the frame is in position. See
diagrams to the right and below.
L23 Chesire models and P23 Enigma models:
Remove the glass facia panel from any pro-
tective packaging. The glass facia panel is
supported by four M6 screws which protrude
from the front of the outer casing.
Ensure each screw is unscrewed approxi-
mately one turn from the fully screwed in
position in order to create a 2mm gap
(shown).
Simply hang the facia panel onto the outer
casing ensuring that the corresponding key-
hole shaped holes engage the screwheads
fully.
P23 Enigma models:
To fit the decorative corner columns, ensure
the main glass facia is mounted in position.
Remove any transit tape and unscrew the
front clamping disc and remove.
Compress the column assembly and position behind the glass panel, lining up with the appropriate hole. Release
the assembly when in position and secure in place by refitting the front clamping disc.
7
8.4
L23 Chesire models and P23 Enigma models
Compress the
assembly
Front clamping disc
P23 Monet Trio models
