Focal ASTRAL 16, Руководство пользователя

Страница: 8 / 266

GB
8
ASTRAL 16
™
U s e r m a n u a l
Front Panel
1. Power Button
Use this button to toggle Astral 16 between ON
and STANDBY. Note that the rear panel switch
must be on for the unit to operate.
2. Exit
When navigating the front panel menu, press Exit
to go back.
3. Enter
When navigating the front panel menu, press
Enter to confirm a selection
4. Edit
Press Edit from the home screen to enable state
changes in Astral 16. Use the Volume combo knob
to navigate.
5. Display
The front panel display shows various information
about the unit. It is not a touch screen. Various
parameters can be set according to instructions
“Front Panel”.
6. Volume
The default state for the knob is to control volume
in the selected theater. Press the knob to mute
audio. When in Edit Mode, you can use the knob
to navigate between fields.
Rear Panel
7. HDMI
7 HDMI inputs and 2 outputs are available. All
HDMI inputs and outputs are HDCP 2.2 /HDMI 2.0
compatible. Outputs are mirrored. HDMI Output
1 is eARC and ARC capable. See “Specifications”
for full HDMI specifications.
8. Power Inlet / Fuse Socket / Mains Switch
Mains power is applied to Astral 16 here. Ensure
the fuse installed matches requirements of your
locality. The rear panel switch must be ON for the
unit to operate.
9. Network
Astral 16 must be connected to a network for
setup. It is recommended to be connected for
operation. Speed is 100 Mbps. Use CAT5e or
better cable.
10. USB
Two USB ports are provided to which a USB
microphone may be optionally connected RTA
function. Or, the USB ports may be used for
service.
11. IR
IR input and output are provided via 3.5mm jacks
for optional control via IR remote.
12. Trigger Out
Four separate trigger outputs are provided to
control power of certain connected devices. See
“Triggers” for configuration information.
1
2 3
4
5 6