Focal ASTRAL 16, Руководство пользователя

Страница: 19 / 266

GB
19
ASTRAL 16
™
U s e r m a n u a l
B.
For each speaker, you can define whether it is
a full bandwidth or an active multiway one, with
up to 4 ways definable. At this stage, only the
number of ways is requested: filters details will be
possible in the specific “Multiway support setup”.
C. The Center channel can be turned to Phantom
mode, the signal being played in Left and Right
channels, removing the need to have a physical
center channel in the installation.
D. Top channels can be defined as Dolby Atmos
Enabled for the case up-firing speakers are used.
In such case, select the base speaker location
which can be either the “Front”, “Side” or ”Back”
speakers position, depending on the base layer
definition. Keep «None» for normal down-firing in
ceilings speakers.
E.
For each speaker, you can define whether
replication is required. Use this feature for multiple
subwoofers or multiple rows of surround speakers
declaration or any speaker you wish to replicate.
In case there is no subwoofer in the system, please
select “0” in the subwoofer row.
F. Press Next to reach the next layer and follow
again steps A to E until all three layers are defined.
G.
At the end, a summary of the Speakers
Configuration is shown. A four digits description
is given following this order:, “Base Layer . LFE .
Height Layer . Top Layer”.
H.
Save to exit and reach the Speakers edition
page loaded with the default audio profile “New
profile 1”.
Profiles
For each Theater, Sub-Theater, and zone, you
can save multiple profiles for different listening
preferences. Profiles can be recalled as part of
presets “Presets”. A profile includes the following
information: Speaker definition (multi-way, levels,
delays), bass management, manual EQ, and Dirac
filter design if applied.
Some clients have different EQ profiles based on
the type of content they listen to e.g. movies vs.
music.
1. Rename
By default, one profile is created called New
Profile 1. You can rename this to something more
descriptive.
2. New
Click New to build a new profile from defaults.
3. Duplicate
Build a variation on a saved profile. This is
especially useful if you have a profile designed with
Dirac Live. Since you cannot edit Dirac reference
profiles directly, you can build a duplicate and edit
that duplicate.
4. Save
After any changes to a profile or creation of a new
one, you must SAVE your changes.
1
2
3
4