Page 3 of 10 | 20180626
User Manual:
15 Gallon Battery-Powered Portable Foam Unit | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model Number: FI-BP-15N, FI-BP-15NK, FI-BP-15NV AND RELATED UNITS
OPTIONS
Pump Seal Material
FI-BP-15N
Santoprene (
standard
)
Viton
(V)
Kalrez
(K)
Add bold option codes to item number as shown. For standard options, no option code is needed.
Examples:
• FI-BP-15N (standard unit with Santoprene pump seals)
• FI-BP-15NV (unit with Viton pump seals)
REQUIREMENTS
Liquid temperature range
40-100˚F (4.4-37˚C)
Electrical requirements
120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only
Operating voltage
12 VDC
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of
application and compatible with unit materials and pump seals. For more information
on chemical compatibility, consult the manufacturer or SDS for your product or
contact our customer service department.
SPECIFICATIONS
Power type
Battery
Battery charge time (from full depletion)
7.5 hours
Battery run time (from full charge)
Up to 2 hours of non-continuous run time
Chemical pickup type
Draws from pre-mixed solution
Number of products unit can draw from
One product
Suction line diameter
3/8 in. (9.5 mm) inside diameter
Capacity
15 gallons (56.78 liters)
Discharge hose diameter/length
15 ft. (4.6 m) hose, with 1/2 in. (12.7 mm) inside diameter
Discharge wand/tip type
Stainless steel wand with 650 fan tip and ball valve
Output distance
5-6 ft. (1.52-1.83 m)
Output volume
4-5 gal/min (15-18.93 l/min) of foam
Flow rate*
2 gal/min (7.6 l/min)
Pump seals
Santoprene, Viton, or Kalrez
Wheel type
Two 10 inch non-marking wheels
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
