FoamFly FAT P-47, Инструкция по эксплуатации, Страница: 7 / 13

5
ii) Roll the wings into shape: (See the Appendix Section, “Rolling the
Foam”)
b) After the wing panels are formed, test fit the pieces. The airfoil should
be a good fit in the slot on the fuselage pod without forcing it. You can
bend the leading edge with finger and thumb if necessary.
c) Run strapping tape (the kind with the strings in it) along the leading and
trailing edge of the wing on the bottom.
4) Assembly:
a) Tape hinge the elevator in the center of the horizontal stabilizer, then
tape the rudder in place on the fuselage.