FoamFly FAT P-47, Инструкция по эксплуатации, Страница: 12 / 13

©2006 FoamFly.com
10
3) “Landing Gear” or So that’s what the ribs are for!
a)
Bend landing gear supports with an extra loop on top. Tie the loop to a
piece of 1/32” plywood with thread or dental floss, then glue everything
in place.
b) Glue the plywood/gear combo in between the layers of foam ribs. The
plywood helps distribute the force of the wire, and keep the gear in
place. Then, contact cement the ribs in place, and hot glue weld around
them.
c) The P-47 should have two large wheels, one under each wing just
under the leading edge, and a small one in the tail.
4) Motor Mount Templates:
StickMotor Mount
Cut out
Glue 3/8” wood
as shown.