FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物技术开发有限公司
17
/
39
NOTE:
1) When user enters this submenu, user can choose the output program(s) by moving the
UP/DOWN key.
2) Then pressing ENTER to choose the output Carrier(s). Moving the UP/DOWN key
to turn up the mark “
※
”, which means to output the program from current Carrier.
2.7 to 2.10 are for ASI input port. The
Program Parse
setting principle is the same
as tuner input..
4.2.4 Output Setting
User can select “Output setting” in the main interface and then press ENETR to
set the outputting parameters. The display show as below:
►
3.1 Output 1 3.2 Output 2
3.3 Output 3 3.4 Output 4
►
2.1.1 Prog Parse Port 1 Prog 7
Prog 1 CCTV1 A B C D
Choose Carrier to output
2.1.2 Sat Freq Set
3840 MHz
2.1.3 Symbol Rate
27.500MHz
2.1.4 LNB Voltage
*V (13V) H(18V) OFF(OV)
2.1.6 22 KHz Switch
*OFF ON
The current Port
The current Port total program number
►
2.7.1 Prog Parse