www.fmuser.org
www.fmuser.org
17
Figure 9-4 Page of STATUS
Two pictures in Figure 9-4 show the status of all parameters, users can find out the system is
running normally or not.
RF OUTPUT: ON/OFF; refer to control logic section.
ON: RF output is in normal status.
OFF: RF power is off.
SYSTEM: Normal/Error
Indicate system errors. Contact equipment provider when error happens.
FWD POWER: Normal/Warning/Protect
Normal: forward power is normal.
Warning: forward power is higher than setting power.
Protected: forward power is too high, RF power is turned off.
RFL POWER: Normal/Warning/Protect/Protect H
Normal: reflect power is normal.
Warning: reflect power is high, may cause RF power drop.
Protected: reflect power is too high, RF power is turned off.
AMP VOLTAGE: Normal/Warning/Protect
Normal: amplifier voltage is normal.
Warning: amplifier voltage is high, may cause RF power drop.
Protected: amplifier voltage is too high, RF power is turned off.
DRV CURRENT: Normal/Warning/Protect
Normal: preamp current is normal.
