www.fmuser.org
www.fmuser.org
12
If LCD displays picture 1, it means no audio signal input, If LCD displays picture 2, user can
press “Select” key, entering variable status, and then, press “
▲
” or “
▼
” key, When deviation
appears at the middle, it means modulation frequency deviation
±
50KHz. When deviation at the
full mark, it means
±
100KHz.
9.1.3 A/V Ratio Setting
Single click “Mode” key on the front panel, putting “LCD” Display under “paging” status,
and then ,pressing “
▲
” or “
▼
” key, making window frame at
User can press “Select” key, entering variable status, and then, pressing “
▲
” or “
▼
” key
achieving desirable value, finally.(Suggestion: keep the factory default setting)
9.1.4 Program Label Setting
Single click “Mode” key on the front panel, putting “LCD” Display under “paging” status,
and then ,pressing “
▲
” or “
▼
” key, making window frame at
The factory default setting is 8 (A)s. If it is necessary to set program label, user can follow the
steps below:
Program
:
AAAAAAAA
A/V Proportion
:
- 18.0 dB