Operating Manual EMGZ 321
12.03.2020
39
9.
Click on Properties. The following dialog box “Internet protocol Version 4
(TCP/IPv4) Properties” will appear.
10.
Select the radio button “Use the following IP address:”
11.
Enter the IP address for the computer that could be 192.168.0.1
12.
In the Subnet mask, enter 255 255 255 000, as shown above.
13.
Click the “OK” button.
14.
Close all windows
The computer is now ready to communicate with the EMGZ321 amplifier:
1.
Open Microsoft Internet Explorer or Mizilla Firefox.
2.
The default IP address for the EMGZ321 is 192.168.000.090 as long as it was
not changed over the operating penal. Enter the IP address e.g. with
http://192.168.000.090
in the address bar and hit the Enter key. The screen
“Device information” Fig.29 will open up.
3.
Then proceed as described in chapter 9.1 "Parameterization in a Network Using
a Web Browser".
4.
If a different IP address and subnet mask is configured at the EMGZ321 make
sure that the computer is setup appropriate.
5.
Once you return to your office, don’t forget to reconfigure your PC to “Automatic
assignment of the IP-address” (see last dialog box).
