FMS Eazy RC 540mm PA-18 Super Cub, Инструкция по эксплуатации

Страница: 7 / 24

1.Insert the front landing gear into the
slots as shown.
1.Insert the rear landing gear into the
slot as shown.
Front landing gear assembly
Rear landing gear assembly
1.Remove the battery cover at the bottom of
fuselage. Connect the full charged battery to
the receiver，then stick the battery into the
cabin，making sure the battery is well
secured. Reinstall the battery cover.
Battery installation
The propeller protector can automatically
eject the propeller when the aircraft encoun-
ters an unconventional landing, effectively
preventing the electronic components from
over current. To install the propeller back to
the base, insert the upper part centerly
through the motor shaft, and hear a slight"-
click"sound, indicating it is secured in place.
07
Propeller Protector Instruction
Note: Insert the upper part centerly through
the motor shaft, and hear a slight"click"-
sound, indicating it is secured in place.
EN